- Plastic Injection Molding Machines
- HXF Series Standard Injection Molding Machine
- HXM Series Servo Motor Injection Molding Machine
- HXW Series Variable Pump Injection Molding Machine
- PET Series Injection Molding Machine
- PET Preform Injection Molding Machine
- PET Cap Molding Machine
- High-speed Injection Molding Machines
- Injection Molding Machine for Thin Wall Production
- Injection Molding Machine for Disposable Spoons and Containers
- HXZ Series Two Platen Injection Molding Machines
- PVC Preform Injection Molding Machine
- Custom Injection Molding Machines
- Unmixed Two Color Injection Molding Machine(HXS Model)
- Mixed Two Color Injection Molding Machine(HXS/h Model)
- Thermoset Injection Molding Machine
- Plastic Auxiliary Machines
- Plastic Hopper Dryer
- One Piece Complete Auto Loader
- Water Cooled Chiller
- Plastic Crusher
- Plastic Vertical Color Mixer
- Plastic Dehumidifier
- Mold Temperature Controller
- Belt Conveyors
- Color Dose Mixer
- Swing-Arm Robot
- Plastic Injection Mold
- PET Preform Mold
- Commodity Mold
- Household Appliances Mold
- Auto Parts Mold
HX(*) 128 Injection Molding Machines
Features
1. HX servo drive motor injection molding machine is with clamping force ranging from 65 to 2000 tons.
2. Oil temperature is greatly reduced than other molding machines.
3. During mold opening and closing, impact is weak. Thus, machine life as well as the mold life is prolonged.
4. Hydraulic variable pump controlling system features fast response and short forming cycle, which contributes to energy saving and environment protection. Besides, with this high-performance variable pump controlling system, three-way ratio valve is not a must to HX 128 servo drive motor injection molding machine.
Advantages of HX 128 Injection Moulding Device
1. Molding Stability
Adoption of servo motor closed-loop control ensures great improvement in repeatability.
2. Quiet Operation
Lower noise is generated, particularly in low speed applications.
3. Reliable Holding Pressure
Compared with traditional hydraulic machine, HX 128 servo drive motor injection molding machine is of more stable holding pressure.
4. Better Oil Temperature Stability
Only the necessary hydraulic oil needed for multi functions is delivered by servo system, which as a result avoids unnecessary generation of heat and substantially lowers the oil cooling requirements.
Parameters of HX 128 Servo Drive Motor Injection Molding Machine :
| MODEL:HX(*)128/420 | |||||
| TECHNICAL PARAMETER TABLE | A | B | C | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 35 | 38 | 42 |
| SCREW L/D RATIO | L/D | 23.8 | 22 | 19.9 | |
| INJECTION CAPACITY (THEORETICAL) | cm3 | 192 | 226 | 277 | |
| INJECTION WEIGHT(PS) | g | 143 | 168 | 206 | |
| Oz | 6.1 | 7.2 | 8.8 | ||
| INJECTION PRESSURE | MPa | 219 | 186 | 152 | |
| INJECTION RATE | g/s | 87 | 102 | 126 | |
| PLASTICIZING CAPACITY | g/s | 11 | 13 | 15 | |
| SCREW SPEED | rpm | 200 | |||
| CLAMPING UNIT | CLAMP FORCE | KN | 1280 | ||
| OPEN STROKE | mm | 350 | |||
| MAX. MOULD | mm | 450 | |||
| MIN. MOULD | mm | 150 | |||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 410×370 | |||
| EJECTOR FORCE | KN | 45 | |||
| EJECTOR STROKE | KN | 120 | |||
| EJECTOR NUMBER | n | 5 | |||
| OTHERS | PUMP PRESSURE | MPa | 16 | ||
| MOTOR POWER | KW | 13/15 | |||
| HEATING POWER | KW | 10.5 | |||
| MACHINE DIMENSION (L×W×H) | m | 4.41*1.2*1.89 | |||
| MACHINE WEIGHT | t | 3.2 | |||
| OIL TANK CAPACITY | L | 235 | |||
Mold Plate Dimension:
