- Plastic Injection Molding Machines
- HXF Series Standard Injection Molding Machine
- HXM Series Servo Motor Injection Molding Machine
- HXW Series Variable Pump Injection Molding Machine
- PET Series Injection Molding Machine
- PET Preform Injection Molding Machine
- PET Cap Molding Machine
- High-speed Injection Molding Machines
- Injection Molding Machine for Thin Wall Production
- Injection Molding Machine for Disposable Spoons and Containers
- HXZ Series Two Platen Injection Molding Machines
- PVC Preform Injection Molding Machine
- Custom Injection Molding Machines
- Unmixed Two Color Injection Molding Machine(HXS Model)
- Mixed Two Color Injection Molding Machine(HXS/h Model)
- Thermoset Injection Molding Machine
- Plastic Auxiliary Machines
- Plastic Hopper Dryer
- One Piece Complete Auto Loader
- Water Cooled Chiller
- Plastic Crusher
- Plastic Vertical Color Mixer
- Plastic Dehumidifier
- Mold Temperature Controller
- Belt Conveyors
- Color Dose Mixer
- Swing-Arm Robot
- Plastic Injection Mold
- PET Preform Mold
- Commodity Mold
- Household Appliances Mold
- Auto Parts Mold
HX(*) 218 Injection Molding Machines
Description
HX 218 horizontal injection molding machine adopts the hydraulic transmission system and is driven by the servo motor. Highly energy-saving molding machine is characterized by a high speed response accumulator, which can effectively save the hydraulic oil in hydraulic system and release it out again when necessary. Based on the flexible response, high speed injection molding is fulfilled. As specialist plastic moulding device supplier in China, we provide various injection molding machine models for options.
Advantages
1. HX 218 horizontal injection molding machine runs effectively by keeping the balance between energy supply and demand. Specifically speaking, power system can provide the accurate amount of the energy according to that the injection molding machine needs. In this way, energy loss is avoided.
2. As the “new break-through”, HX 218 plastic moulding machine is distinctive due to the pressure close-loop control. It can adjust the setting pressure and actual pressure to the same.
Parameter :
| MODEL:HX(*)218/730 | |||||
| TECHNICAL PARAMETER TABLE | A | B | C | ||
| INJECTION UNIT | SCREW DIAMETER | mm | 45 | 50 | 55 |
| SCREW L/D RATIO | L/D | 22.2 | 20 | 18.2 | |
| INJECTION CAPACITY (THEORETICAL) | cm3 | 349 | 431 | 522 | |
| INJECTION WEIGHT(PS) | g | 324 | 400 | 485 | |
| Oz | 11.4 | 14.1 | 17.1 | ||
| INJECTION PRESSURE | MPa | 210 | 170 | 140 | |
| INJECTION RATE | g/s | 128 | 158 | 192 | |
| PLASTICIZING CAPACITY | g/s | 18 | 25 | 32 | |
| SCREW SPEED | rpm | 170 | |||
| CLAMPING UNIT | CLAMP FORCE | KN | 2180 | ||
| OPEN STROKE | mm | 520 | |||
| MAX. MOULD HEIGHT | mm | 580 | |||
| MIN. MOULD HEIGHT | mm | 200 | |||
| SPACE BWTWEEN TIE-BARS (W×H) | mm | 520×520 | |||
| EJECTOR FORCE | KN | 80 | |||
| EJECTOR STROKE | KN | 150 | |||
| EJECTOR NUMBER | n | 9 | |||
| OTHERS | PUMP PRESSURE | MPa | 16 | ||
| MOTOR POWER | KW | 18.5/23 | |||
| HEATING POWER | KW | 13.55 | |||
| MACHINE DIMENSION (L×W×H) | m | 5.70*1.34*2.12 | |||
| MACHINE WEIGHT | t | 6.6 | |||
| OIL TANK CAPACITY | L | 281 | |||
Mold Plate Dimension:
